ATW-202

Click on the picture below to get more information on atw-202:


AUDIO TECHNICA - 200 SERIES WIRELESS HANDHELD MICROPHONE SYSTEM
Buy Today @ The Sound Professionals, Inc.

MANUFACTURER'S WEBSITE

Audio-Technica’s Freeway 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cordset. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.


 SYSTEM CONFIGURATIONS

UniPak™ Transmitter System
ATW-201
ATW-R200 receiver and ATW-T201 transmitter.
Select a Wireless Essentials® microphone or cable to complete the system.		 MSRP* US$149.95
UniPak™ Guitar System
ATW-201/G
ATW-R200 receiver, ATW-T201 transmitter and Hi-Z instrument input cable. 		MSRP* US$174.95
UniPak™ Headworn Microphone System
ATW-201/H
ATW-R200 receiver, ATW-T201 transmitter and PRO 8HEcW headworn microphone. 		MSRP* US$249.95
UniPak™ Lavalier Microphone System
ATW-201/L
ATW-R200 receiver, ATW-T201 transmitter and lavalier microphone. 		MSRP* US$224.95
Handheld Microphone System
ATW-202
ATW-R200 receiver and ATW-T202 handheld microphone/transmitter. 		MSRP* US$174.95


 OVERALL SYSTEM SPECIFICATIONS
 
Operating Frequency VHF high band, 169 MHz to 172 MHz
Number of Channels Fixed channel
Frequency Stability ±0.005%
Modulation Mode FM
Maximum Deviation ±15 kHz
Operating Range 200' minimum
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Frequency Response 80 Hz to 13 kHz


 RECEIVER SPECIFICATIONS
 
Receiving System Non-diversity, single-channel, dual antenna system
Image Rejection 50 dB minimum
Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 20 dBµV for 60 dB S/N (IEC-weighted)
Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
Output Connector 1/4" TS ("mono") phone jack
Power Supply 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply
Dimensions 8.27" (210.0 mm) W x
1.72" (43.5 mm) H x
4.73" (120.0 mm) D
Net Weight 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g)
Accessories Included AD1202A 120V docking AC adapter; 120V AC IEC cordset


 BODY-PACK TRANSMITTER SPECIFICATIONS
 
RF Power Output 10 mW High position, 2 mW Low position, typical
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB, A-weighted
Input Connections High impedance, low impedance, bias
Battery 9V (NEDA type 1604) alkaline, not included
Current Consumption 30 mA typical
Battery Life Approximately 15 hours in High position;
Approximately 20 hours in Low position
(depending on battery type and use pattern)
Dimensions 2.56" (65.0 mm) W x
4.33" (110.0 mm) H x
1.00" (25.4 mm) D
Net Weight 2.8 oz (78 g)


 HANDHELD TRANSMITTER SPECIFICATIONS
 
RF Power Output 10 mW High position, 2 mW Low position, typical
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB, A-weighted
Microphone Element Dynamic unidirectional
Battery 9V (NEDA type 1604) alkaline, not included
Current Consumption 30 mA typical
Battery Life Approximately 15 hours in High position;
Approximately 20 hours in Low position
(depending on battery type and use pattern)
Dimensions 9.50" (241.3 mm) long,
2.10" (53.3 mm) diameter
Net Weight 12.7 oz (360 g)

The Sound Professionals carry the widest selection and have the lowest prices on atw-202.